Skip to main content

Brick Makeover

Replacement Bricks Stand Out? How to Blend Them Into Existing Brickwork

Get a Quote

Replacing damaged or missing bricks is often necessary to keep a property structurally sound and prevent further deterioration. However, there is one problem homeowners frequently notice after the work is finished: the replacement bricks look completely different from the surrounding wall.

They might be too bright, too dark, too clean or have a different texture from the original brickwork. Even when the repairs have been carried out properly, the difference can make an otherwise attractive property look patchy and unfinished.

The good news is that replacement bricks do not always have to remain noticeable. With careful brick selection, colour matching, appropriate mortar and professional finishing techniques, it is often possible to blend new bricks into existing brickwork far more effectively.

For homeowners dealing with mismatched repairs, Brick Makeover offers a starting point for understanding how brickwork appearance can be improved. The key is identifying why the replacement bricks stand out and choosing the right approach to achieve a more consistent finish.

1. Why Do Replacement Bricks Stand Out From Existing Brickwork?

The most common reason replacement bricks stand out is that new materials rarely match the appearance of older bricks perfectly. Even bricks described as the same colour, size or type can look noticeably different once installed alongside weathered masonry.

This is particularly obvious on older properties, where years of exposure have changed the appearance of the original brickwork.

Natural ageing changes brick colour

Bricks are exposed to sunlight, rain, pollution, temperature changes and general environmental conditions throughout their lifespan. These factors gradually influence their colour and surface appearance.

For example, a traditional red brick wall may have become darker and more muted over several decades. New replacement bricks from a current production batch might have a brighter orange or red tone.

The difference becomes especially noticeable when only a handful of bricks have been replaced.

Manufacturing differences

Brick manufacturers produce materials using different clay sources, firing temperatures and manufacturing processes. These variations influence the final appearance.

Even products from the same manufacturer can vary slightly between production batches.

Differences may include:

  • Red, brown, orange or yellow undertones.
  • Surface texture and roughness.
  • Size and shape.
  • Firing marks and natural colour variation.
  • The amount of visible sand or mineral content.
  • Surface finish and water absorption.

A brick that looks like a close match in a showroom or photograph may appear different when placed directly against an existing wall.

Weathering and environmental staining

Older brickwork often develops a distinctive appearance because of its surroundings.

Walls exposed to traffic pollution may become darker, while sheltered sections can retain a cleaner appearance. Areas beneath rooflines, around windows and close to drainage outlets may also weather differently.

This means a replacement brick needs to be assessed against the actual section of wall being repaired, rather than relying on its original colour alone.

Understanding these differences is the first step towards achieving a convincing repair.

2. Choosing Replacement Bricks That Match the Existing Wall

Selecting suitable replacement bricks is one of the most important parts of achieving a consistent finish. A close match involves more than choosing bricks with a similar basic colour.

Professional brick matching takes account of the wall’s overall appearance, including its texture, dimensions, colour variation and surface condition.

Look beyond the main brick colour

A wall that appears red from a distance may contain several different shades when viewed closely. Some bricks might have darker brown patches, while others have orange or purple undertones.

These variations give traditional brickwork much of its character.

When selecting replacement materials, consider:

Colour: Look for the underlying tones rather than concentrating on the dominant colour.

Texture: Check whether the original bricks are smooth, sand-faced, rough or heavily textured.

Size: Differences in brick dimensions can affect the appearance of joints and the overall alignment of the wall.

Shape: Older bricks may have irregular edges or slightly different profiles from modern alternatives.

Surface finish: Some bricks have a weathered, handmade appearance, while others have a more uniform manufactured finish.

Why physical samples matter

Photographs and online product descriptions are useful starting points, but they cannot always show the subtle differences between brick types.

Viewing physical samples against the existing wall provides a much better indication of how the materials will look together.

It is also worth comparing samples in different lighting conditions. A brick that appears to match in bright sunlight may look noticeably different on an overcast day.

What if an exact match is unavailable?

An exact match is not always possible, particularly with older or discontinued brick types.

In these situations, a close colour and texture match may be more practical than searching indefinitely for an identical product.

The surrounding brickwork can also influence the best approach. If the repair is relatively small, careful finishing may help reduce the visual difference. Larger repairs may require a broader treatment to achieve a more consistent appearance.

The objective should be a natural-looking result rather than simply choosing the nearest available brick colour.

3. Using Brick Tinting to Blend Replacement Bricks

When replacement bricks are structurally suitable but visually different, brick tinting can offer an effective way to improve their appearance.

Brick tinting involves applying specialist masonry colour treatments to adjust the visible colour of bricks. Unlike ordinary paint, professional brick tinting products are designed for masonry applications and are selected to achieve a more natural finish.

It can be particularly useful when replacement bricks are too bright, too dark or have an obvious colour difference compared with the surrounding wall.

How does brick tinting work?

The process generally begins with assessing the existing brickwork and identifying the colour differences.

A suitable tint is then selected and tested to establish how closely it can reproduce the surrounding appearance.

Rather than applying one flat colour across the repaired area, professional tinting can involve carefully adjusting individual bricks to reflect the natural variation found in the original wall.

This matters because brickwork rarely consists of one completely uniform shade.

When is brick tinting suitable?

Brick tinting may be appropriate when:

  • New replacement bricks are noticeably brighter than the original wall.
  • Repaired sections contain several different brick colours.
  • Matching materials are no longer available.
  • Extensions have been built using slightly different bricks.
  • Previously completed repairs stand out.
  • Localised brick replacements have created visible patches.

The suitability of tinting depends on the condition and type of brick, as well as the size and nature of the colour difference.

Brick tinting compared with painting

There is an important difference between specialist brick tinting and ordinary masonry paint.

FeatureSpecialist brick tintingOrdinary masonry paint
AppearanceDesigned to retain a natural brick appearanceCan create a more uniform surface
Colour variationCan be adjusted to suit individual bricksUsually produces a consistent colour
Surface characterIntended to preserve visible brick textureMay obscure some surface detail
ApplicationRequires careful colour matchingGenerally applied across a wider area
Main purposeBlending mismatched brickworkChanging the overall wall colour

A suitable tinting treatment can improve the appearance of replacement bricks without making the wall look as though it has simply been painted over.

Professional assessment is important because not every masonry colour treatment is appropriate for every brick type.

4. Getting the Mortar Colour and Joint Finish Right

Homeowners often focus entirely on the replacement bricks when trying to correct a mismatched repair. However, mortar can make just as much difference to the finished appearance.

Even when the bricks are a reasonably close match, incorrect mortar colour or joint detailing can make the repaired section stand out.

Why mortar colour matters

Mortar typically covers a significant amount of the visible surface between bricks. Its colour influences the overall tone of the wall.

For example, fitting replacement bricks with pale mortar into an older wall with darker grey joints can create a noticeable contrast.

The same problem occurs when the mortar is too warm, too cold or significantly different in texture.

When assessing mortar, consider:

  • Original colour and undertones.
  • Sand type and grain size.
  • Cement or lime composition.
  • Joint depth and width.
  • Surface finish.
  • The condition of the surrounding mortar.

Matching the existing pointing style

The way mortar is finished also affects the appearance of brickwork.

Common joint styles include:

Flush joints: Mortar is finished level with the brick surface, creating a relatively flat appearance.

Recessed joints: Mortar sits slightly behind the brick face, making the individual bricks more prominent.

Weather-struck joints: Mortar is shaped to create an angled finish that helps shed water.

Bucket-handle joints: Mortar is finished with a curved profile, producing a neat, rounded appearance.

Using a different joint style during repairs can make even well-matched bricks look out of place.

Choosing the right mortar for the property

Matching appearance should never come at the expense of compatibility.

Older buildings may have traditionally used lime-based mortar, which has different characteristics from modern cement-rich mixes. Using an excessively hard mortar on softer, older brickwork can cause damage over time.

The replacement mortar should be suitable for the age, type and condition of the existing masonry.

A professional assessment can establish the appropriate composition and finish, helping the repaired area look consistent while protecting the surrounding brickwork.

5. Blending Small Repairs Compared With Larger Brickwork Sections

The size of the repaired area has a considerable influence on how noticeable replacement bricks will be.

Replacing two or three damaged bricks in the middle of a wall presents a different challenge from repairing a large section around a window or replacing brickwork across an entire elevation.

The approach needs to reflect the scale of the work.

Why small repairs can be particularly noticeable

When only a few bricks are replaced, the eye naturally compares them with the surrounding original materials.

If the new bricks are significantly brighter or have a different texture, the contrast becomes immediately obvious.

This is especially true when the replacement bricks form a concentrated patch.

For smaller repairs, carefully matching and tinting individual bricks may provide a suitable solution.

Larger repairs need a broader approach

Where extensive brickwork has been replaced, attempting to treat only a few individual bricks may produce an uneven result.

A larger repair may require more detailed colour assessment and a consistent treatment across the affected section.

The surrounding wall also needs to be considered so that the repaired area does not look artificially uniform.

How the size of the repair affects the approach

Repair sizeCommon appearance problemPossible approach
1 to 5 bricksBright replacement bricksIndividual brick tinting
6 to 20 bricksNoticeable colour patchDetailed colour matching
20 to 50 bricksUneven repaired sectionBroader tinting assessment
Larger replacement areaDifferent overall wall appearanceFull assessment of the affected elevation

These categories are general examples rather than strict installation rules. The appropriate treatment depends on the wall, the original materials and the extent of the colour difference.

What about extensions and new brickwork?

Extensions can be particularly challenging because the original property may have weathered for decades, while the new section contains recently manufactured bricks.

Even when the original brick type has been identified, the difference in age can make the extension look noticeably different.

Careful tinting may help reduce this contrast and create a more consistent appearance across the property.

6. Can You Blend Replacement Bricks Yourself?

Some homeowners consider adjusting the appearance of replacement bricks themselves, particularly when only a small number of bricks have been installed.

While certain minor appearance issues may seem straightforward, achieving a convincing match can be more difficult than expected.

The main challenge is understanding how different materials react to colour treatments and how the finished result will look once the treatment has dried.

Why DIY brick colour matching can go wrong

A common mistake is choosing a colour based on how the brick looks when wet or under artificial lighting.

Brick colour can appear quite different when dry, and surrounding materials can influence how a shade is perceived.

Other potential problems include:

  • Applying a colour that is too strong.
  • Creating an obvious painted appearance.
  • Failing to account for natural colour variation.
  • Using unsuitable products on porous masonry.
  • Applying treatments unevenly.
  • Making future repairs more complicated.

Another concern is moisture. Bricks and mortar need to retain suitable moisture-management properties, so using inappropriate coatings can create problems beyond appearance.

Professional brick tinting versus DIY

ConsiderationDIY approachProfessional approach
Colour selectionBased on personal judgementAssessed against existing masonry
TestingOften limitedCan involve sample testing
Natural variationDifficult to reproduce consistentlyIndividual brick variations can be considered
Product suitabilityDepends on product knowledgeSpecialist masonry products selected
ApplicationRequires careful preparationExperienced application techniques
Overall finishResults can be unpredictableGreater control over consistency

DIY work may appear cheaper initially, but mistakes can become expensive if the treatment needs removing or correcting.

Professional brick tinting is particularly worth considering where the repaired area is highly visible, the property has a distinctive brick finish or the colour difference is substantial.

7. How Much Does It Cost to Blend Replacement Bricks?

The cost of blending replacement bricks depends on the size of the affected area, the level of colour correction required and the condition of the existing brickwork.

A small repair involving a handful of mismatched bricks will generally require less work than treating an extensive section of an elevation.

However, there is more involved than simply applying a colour treatment.

Typical UK brick tinting costs

The following figures are indicative budgeting guides rather than fixed quotations. Actual prices vary depending on the property, preparation requirements, access and complexity of the colour matching.

Type of workTypical guide price
Small localised brick tinting repair£250 to £450
Medium-sized replacement brick area£450 to £850
Larger brickwork blending project£850 to £1,500
Extensive elevation colour correction£1,500 to £3,000+

These figures are broad estimates for planning purposes. Specialist work involving difficult access, unusual brick types or extensive preparation may cost more.

What influences the final price?

Number of bricks: More replacement bricks generally mean additional preparation and application time.

Colour differences: A subtle colour adjustment may be simpler than correcting several contrasting shades.

Brick texture: Heavily textured or irregular bricks may require more detailed treatment.

Access: Work at height may involve additional equipment, safety arrangements and labour.

Preparation: Dirty, contaminated or deteriorating masonry may need cleaning or other attention before tinting.

Testing and colour matching: Achieving a natural appearance can require careful sample testing and adjustments.

Why the cheapest quotation is not always the best value

Professional brick tinting requires an understanding of masonry materials, colour variation and suitable application methods.

A higher-priced contractor may allow more time for assessment, use appropriate specialist products and carry out more detailed colour matching.

Insurance, experience, proper equipment and a careful finishing process also contribute to the overall cost.

Choosing the cheapest option without checking what is included can lead to a poor result that requires further work.

It is worth comparing quotations based on the proposed finish, preparation and treatment rather than price alone.

8. How to Choose a Professional Brick Tinting Specialist

Blending replacement bricks is a specialist task because the finished appearance depends on several small details working together.

A contractor needs to understand the original brickwork, select suitable treatments and apply them carefully enough to avoid an obvious difference between repaired and untouched areas.

Choosing someone with relevant experience is therefore essential.

Look for experience with different brick types

Not all bricks respond to tinting in the same way.

Traditional clay bricks, modern manufactured bricks and heavily weathered masonry can have different surface characteristics.

A specialist should be able to assess these differences and recommend a suitable approach.

Ask whether they have experience working with brickwork similar to yours and whether they can explain how they intend to achieve the required appearance.

Ask about sample testing

Colour matching should not be based entirely on guesswork.

A professional should be prepared to discuss testing and explain how the proposed colour will compare with the surrounding masonry.

Where appropriate, sample areas can help establish the finish before the full treatment begins.

Check what the quotation includes

Before agreeing to the work, establish whether the quotation covers:

  • Initial inspection of the existing brickwork.
  • Assessment of replacement brick colour and texture.
  • Cleaning and preparation where required.
  • Colour matching and sample testing.
  • Specialist tinting products.
  • Application and finishing.
  • Access equipment, if needed.
  • Any relevant workmanship cover.

It is also sensible to ask how the finished work will be assessed and what maintenance, if any, may be required.

Consider the overall appearance of the property

The objective is not necessarily to make every brick look identical. Natural brickwork contains variation, and an overly uniform finish can look just as artificial as a mismatched repair.

A good specialist understands how to work with the existing wall rather than trying to make it look completely new.

Careful assessment and appropriate colour correction can make replacement bricks far less noticeable while retaining the character of the original property.

Frequently Asked Questions

Can replacement bricks be made to look like old bricks?

Yes, replacement bricks can often be made to blend more closely with older brickwork using specialist colour matching and tinting techniques. The process takes account of the original brick colour, surface texture and natural variation. The final result depends on the condition of the wall and how different the replacement materials are.

Why do new bricks look brighter than old brickwork?

New bricks often look brighter because they have not experienced years of weathering, pollution and environmental exposure. Sunlight, rain and general atmospheric conditions gradually alter the appearance of older masonry. Manufacturing differences can also contribute to the contrast between replacement bricks and the original wall.

Does brick tinting last permanently?

Specialist brick tinting is designed to provide a durable colour treatment, but its lifespan depends on the products used, the brick condition and environmental exposure. Weathering and pollution can gradually influence the appearance over time. A professional should explain the expected performance of the chosen treatment and any relevant maintenance requirements.

Can you tint just one replacement brick?

Yes, it is possible to tint an individual replacement brick, particularly where a small repair stands out against otherwise consistent brickwork. However, the surrounding bricks need to be considered when selecting the colour. Matching several natural shades may be necessary to avoid creating another noticeable patch.

Will brick tinting damage the original brickwork?

When suitable specialist products are selected and applied correctly, brick tinting should not damage sound brickwork. However, the condition and type of masonry need to be assessed before treatment. Inappropriate coatings or unsuitable products can affect the surface and moisture behaviour, so professional product selection is important.

Can different coloured bricks be blended on a house extension?

Yes, brick tinting can help reduce the visual difference between new extension brickwork and an older property. The treatment needs to account for the original wall’s colour variation, texture and weathering. A professional assessment will establish whether the new bricks can be adjusted to achieve a more consistent appearance.

Is brick tinting better than painting brickwork?

Brick tinting is generally more suitable when the aim is to blend replacement bricks while retaining their natural appearance. Ordinary masonry paint usually creates a more uniform finish and can obscure some of the brick’s original character. The appropriate option depends on whether the objective is localised colour correction or changing the appearance of an entire wall.

How long does professional brick tinting take?

A small repair may be completed within a few hours, while larger projects can take several days depending on preparation, access and colour matching requirements. Sample testing and drying times may also influence the schedule. The contractor should provide a realistic timescale after inspecting the affected brickwork.

Can brick tinting correct mismatched mortar as well?

Yes, mortar colour can sometimes be adjusted as part of a wider brickwork colour-matching project. However, the treatment needs to be suitable for the mortar’s composition and condition. Where mortar is damaged or deteriorating, repointing with an appropriate mix may be necessary before any colour correction is considered.

Call Now Button