Skip to main content

Brick Makeover

Different Coloured Bricks on a New Housing Development? Here's How to Fix Them

Get a Quote

Moving into a newly built home should be an exciting experience. Buyers naturally expect their property to look finished, with clean brickwork, consistent colours and an exterior that reflects the quality of the development. However, one issue that can cause disappointment is noticeable colour variation between bricks, particularly when different sections of a house or neighbouring properties appear to have been built using completely different shades.

Different coloured bricks on a new housing development are not always a sign of poor workmanship. Brick colour can vary naturally between manufacturing batches, and factors such as weather exposure, mortar selection, construction methods and surface contamination can all affect the finished appearance. Nevertheless, significant or uneven colour differences can make a new property look unfinished or poorly maintained.

The good news is that there are ways to improve inconsistent brickwork without necessarily removing and replacing the existing bricks. Depending on the cause of the problem, professional brick tinting, colour matching and specialist brickwork treatments can help create a more consistent appearance.

This guide explains why different coloured bricks appear on new housing developments, how to identify the cause, which solutions are available and what homeowners should consider before arranging professional work. It also looks at the costs, potential risks and importance of choosing an experienced brickwork specialist.

Why Are There Different Coloured Bricks on a New Housing Development?

Brick colour variation is a relatively common concern on new housing developments. Large projects often involve thousands of bricks, multiple deliveries and several construction teams working across different properties.

Even when the same brick specification is used throughout a development, the finished appearance may not always be completely uniform.

Understanding why the variation has occurred is the first step towards choosing the right solution.

Different manufacturing batches

Bricks are manufactured using natural materials such as clay, which can vary in composition and colour. The manufacturing process also involves controlling factors such as temperature, firing conditions and the position of bricks within a kiln.

As a result, two batches of bricks produced at different times may have slightly different shades.

For large developments, builders may need to order additional bricks after the original supply has been used. If the replacement delivery comes from a different manufacturing batch, the new bricks may look noticeably lighter, darker or warmer than those already installed.

This can become particularly obvious when an extension, garage or additional phase of a development is completed.

Different brick suppliers

Housing developments sometimes use more than one brick supplier because of availability, delivery schedules or changes in construction requirements.

Even bricks described as the same colour or product range can have subtle differences between manufacturers.

Variations in clay composition, surface texture and firing techniques can affect the final appearance.

Homeowners may notice these differences around extensions, neighbouring properties or sections of a building completed at different times.

Uneven blending during construction

Bricklayers normally mix bricks from several packs during construction to help distribute natural colour variations evenly across a wall.

This process is commonly known as blending.

If bricks are taken from only one pack at a time, areas of the wall may develop visible colour patches. A section built using predominantly darker bricks may look very different from another section containing lighter bricks.

On large developments, inconsistent blending can result in noticeable differences between elevations or even between individual properties.

Weather exposure and surface contamination

The appearance of brickwork can also change after installation.

Rainwater, airborne pollution, construction dust and general environmental exposure can affect the appearance of the finished wall.

Newly completed areas may look different from brickwork that has been exposed to the weather for several months.

However, it is important to distinguish natural weathering from manufacturing or installation-related colour differences. The correct treatment depends on the underlying cause.

How to Identify the Cause of Uneven Brick Colours

Before attempting to correct different coloured bricks, homeowners should establish why the variation has occurred.

Applying a treatment without understanding the cause can produce disappointing results or make the problem more noticeable.

Look for clearly defined colour patches

If a section of wall appears consistently darker or lighter than the surrounding brickwork, it may indicate that a different manufacturing batch has been used.

For example, a new extension may have a noticeably different shade from the original house, even though the bricks appear similar in size and texture.

Large areas of uniform colour variation often suggest a difference in the supplied materials rather than ordinary weathering.

Check whether the variation follows the construction pattern

Look closely at the arrangement of the bricks.

If the colour difference follows horizontal or vertical sections of the wall, this may indicate that different batches were used in separate stages of construction.

Irregular patches scattered across the wall may suggest inconsistent blending.

These patterns can help establish whether the issue relates to brick supply or the way the materials were distributed during construction.

Examine the mortar and surrounding surfaces

Sometimes homeowners assume that the bricks themselves are responsible for the colour difference when the actual problem involves mortar or construction residue.

Mortar stains, cement splashes and other deposits can create a patchy appearance.

Efflorescence is another possible cause. This occurs when soluble salts are carried to the surface by moisture and left behind as water evaporates, often producing a white or pale deposit.

A specialist assessment can help determine whether the problem requires cleaning, brick tinting or another form of treatment.

Consider the age of the development

Brickwork completed at different times may have experienced different levels of weather exposure.

A newly built section can appear brighter or more saturated than an older elevation.

This does not necessarily mean the bricks are defective. However, if the difference remains significant after the building has settled into its normal weathering conditions, further investigation may be worthwhile.

Can Different Coloured Bricks Be Fixed Without Replacing Them?

Yes, in many cases, uneven brick colours can be improved without removing the existing brickwork.

Replacing bricks is not always practical, particularly when the variation affects large sections of a property or several houses across a development.

Professional brick tinting is one option for improving colour consistency while retaining the original materials.

What is brick tinting?

Brick tinting is a specialist process that changes the appearance of existing bricks by applying a suitable mineral-based colour treatment.

Unlike ordinary paint, professional brick tinting products are designed to work with the characteristics of masonry.

A suitable treatment can help bring lighter and darker bricks closer to the surrounding colour, reducing obvious variations across the wall.

The aim is not necessarily to make every brick identical. Natural variation is part of the appearance of traditional brickwork. Instead, the objective is to achieve a more balanced and consistent finish.

How does professional brick tinting work?

The process generally begins with an assessment of the existing brickwork.

A specialist examines the brick type, current colour, surface condition and extent of the variation.

The desired shade is then established through colour matching and sample testing.

Once the surface has been prepared appropriately, the tint is applied to selected bricks or areas to achieve the required result.

Depending on the condition of the wall and the scale of the project, more than one application or colour adjustment may be needed.

Why tinting can be preferable to replacement

Replacing bricks involves removing existing materials, sourcing suitable replacements and carrying out additional masonry work.

Even when replacement bricks are available, matching their colour to an established wall can be difficult.

Brick tinting avoids much of this disruption and can be particularly useful when the existing brickwork is structurally sound.

It also allows specialists to address individual problem areas without necessarily treating the entire elevation.

What Is the Best Way to Match Different Coloured Bricks?

Achieving a consistent brick colour requires more than selecting a shade that looks similar from a distance.

Brickwork changes appearance depending on lighting, surface texture, moisture and the surrounding materials.

A successful colour-matching process should account for these factors.

Start with the dominant brick colour

The first step is to identify the main shade across the property.

For example, a development may use a predominantly red brick with some natural darker variations. If a section has been constructed using much lighter red bricks, the treatment should be selected to bring those areas closer to the dominant colour.

Trying to make the whole wall one completely uniform shade can create an artificial appearance.

A professional approach retains some natural variation while correcting the most obvious differences.

Match the undertones

Brick colours often contain subtle undertones that are not immediately obvious.

A brown brick may contain red or orange undertones, while a grey brick may have warmer or cooler characteristics.

Choosing a tint based only on the main colour can produce a result that looks incorrect once applied.

Specialists should consider the underlying tones and test the selected treatment against the surrounding brickwork.

Test the colour before treating the full wall

Sample testing is an important part of achieving a suitable result.

A small test area allows the colour to be assessed against the original brickwork before the full treatment begins.

It also helps establish how the product interacts with the surface and how the finished colour looks in natural daylight.

Homeowners should inspect samples from different viewing angles and under varying lighting conditions where possible.

Consider the mortar colour

The mortar joints contribute significantly to the overall appearance of a brick wall.

Even when the bricks are closely matched, noticeably different mortar colours can make sections of the property appear inconsistent.

However, brick tinting and mortar colouring are separate considerations. Any treatment should be selected carefully to avoid changing the appearance of surrounding materials unnecessarily.

Brick Tinting vs Brick Replacement: Which Is Better?

When different coloured bricks appear on a new housing development, homeowners may initially assume that the affected bricks need to be removed.

Although replacement can sometimes be necessary, it is not automatically the best option.

The decision should depend on whether the problem is purely cosmetic or whether the bricks themselves are damaged or defective.

Comparing the available options

ConsiderationProfessional brick tintingBrick replacement
Main purposeCorrects colour differencesRemoves and replaces existing bricks
Structural impactUsually minimal when correctly appliedRequires masonry work
DisruptionGenerally limitedCan involve more disruption
Material matchingUses existing bricksRequires suitable replacement stock
Suitable for large areasOften practicalCan become expensive
Best applicationSound bricks with colour variationDamaged or unsuitable bricks

When brick tinting is the better option

Brick tinting is often suitable when the bricks are in good condition but have different colours.

For example, if one elevation is noticeably lighter than another because of a separate manufacturing batch, tinting may provide a practical way to improve the overall appearance.

It can also be useful where replacement bricks are no longer available or where matching the original material would be difficult.

When replacement may be necessary

Tinting cannot repair structural defects.

If bricks are cracked, severely damaged, spalling or unsuitable for their intended application, replacement may be more appropriate.

The same applies when the underlying issue involves defective masonry or significant water penetration.

A specialist should distinguish between a cosmetic colour problem and a genuine building defect before recommending treatment.

Can both methods be used together?

Yes. Some properties may require a combination of repairs and colour correction.

Damaged bricks can be replaced first, followed by colour matching to help the new materials blend with the existing wall.

This can be particularly useful when suitable replacement bricks are close in colour but not an exact match.

How Much Does It Cost to Fix Different Coloured Bricks in the UK?

The cost of correcting uneven brick colours depends on the size of the affected area, the type of brick, the degree of colour variation and the preparation required.

A small patch of mismatched bricks will generally involve less work than treating an entire elevation or multiple properties across a housing development.

The following figures are typical UK price guides rather than exact quotations.

Typical brick tinting and brickwork costs

Type of workIndicative UK cost
Small brick tinting repair£250 to £450
Localised colour correction£350 to £750
Single wall or elevation£600 to £1,500
Larger property colour matching£1,200 to £3,000
Extensive housing development workSite-specific quotation
Brick replacement and associated masonry work£500 to £1,500+

These estimates are broad guides. The actual cost of replacement work depends heavily on the number of bricks involved, access and the availability of suitable materials.

What affects the price?

Size of the affected area: Larger walls require more preparation, materials and application time.

Degree of colour variation: Significant differences may require several shades or more detailed colour matching.

Brick condition: Damaged or contaminated surfaces may need cleaning or preparation before tinting.

Access requirements: Upper-storey walls, difficult elevations and restricted access can increase labour and equipment costs.

Colour matching requirements: Achieving a close match across different brick types may require additional testing and specialist application.

Why professional brick tinting costs more than ordinary painting

Brick tinting is a specialist masonry treatment rather than a straightforward decorating job.

The cost reflects the experience required to assess brickwork, identify suitable products, match colours and apply treatments carefully.

A professional contractor should use products appropriate for the masonry and consider how the treatment will interact with the surface.

Cheaper alternatives, such as ordinary masonry paint or unsuitable coatings, may create further problems if they affect the natural appearance or moisture behaviour of the brickwork.

For homeowners investing in a new property, choosing a suitable long-term solution is generally more sensible than opting for the lowest initial price.

Common Mistakes to Avoid When Fixing Uneven Brickwork

Trying to correct different coloured bricks without understanding the material can lead to results that are difficult or expensive to reverse.

There are several mistakes homeowners should avoid.

Painting the bricks with ordinary masonry paint

Ordinary paint may appear to offer a quick solution, but it is not the same as professional brick tinting.

Paint can create an opaque coating that changes the natural appearance and texture of the brick.

Depending on the product and wall construction, an unsuitable coating may also interfere with the movement of moisture through the masonry.

Specialist brick tinting is designed to provide a more appropriate treatment for correcting colour differences while retaining the appearance of the original material.

Using harsh cleaning chemicals

Some homeowners attempt to remove colour differences using strong cleaning products.

This can be ineffective because manufacturing batch variation cannot simply be washed away.

Harsh chemicals may also damage the brick surface, affect mortar joints or cause further staining.

Cleaning should only be carried out after identifying the actual cause of the discolouration and selecting a suitable method.

Treating the entire wall unnecessarily

If only a small section of brickwork is noticeably different, treating every brick may not be necessary.

A carefully planned localised treatment can sometimes provide a more efficient solution.

However, the finished result should always be assessed across the full elevation to ensure that the treated area blends naturally with its surroundings.

Ignoring underlying moisture problems

Colour variation can sometimes be associated with water ingress, dampness or efflorescence.

Applying a tint without addressing the underlying problem may produce an inconsistent finish or fail to resolve the visible issue.

If there are signs of persistent moisture, the cause should be investigated before cosmetic treatment begins.

Attempting DIY colour matching

Matching brick colours is more complicated than selecting a shade from a chart.

The same colour can look different on bricks with different textures, porosity and surface finishes.

An inexperienced application may produce obvious patches, streaks or unnatural colour differences.

Professional assessment and sample testing help reduce the risk of an unsatisfactory result.

How to Choose a Professional Brick Tinting Company

Choosing the right contractor is essential when correcting brick colour differences on a new housing development.

The finished work should look natural and complement the existing masonry rather than creating another visible problem.

Look for experience with different brick types

A suitable contractor should understand how different bricks respond to colour treatments.

Clay bricks, engineering bricks, reclaimed materials and modern facing bricks can have different surface characteristics.

Ask whether the contractor has experience with similar materials and colour-matching requirements.

Request a proper assessment

A reliable specialist should inspect the affected brickwork before recommending a treatment.

This should include identifying the source of the colour variation, checking the condition of the bricks and considering whether cleaning, replacement or tinting is most appropriate.

A quotation based only on photographs may be useful for an initial estimate, but a more detailed assessment can help establish the actual requirements.

Ask about sample testing

Colour samples provide an opportunity to review the proposed finish before committing to the full treatment.

Ask whether test areas can be prepared and assessed in natural light.

This is particularly important on new housing developments where homeowners may be concerned about achieving a consistent appearance across several properties.

Understand the products and application process

The contractor should be able to explain which tinting products are suitable for the brickwork and how they will be applied.

Ask whether the treatment is intended for the specific type of masonry and whether the application allows the material to retain its appropriate moisture characteristics.

Avoid contractors who recommend ordinary paint without considering the nature of the brickwork.

Check insurance and written quotations

Before arranging work, check that the contractor has suitable insurance and provides a clear written quotation.

The quotation should explain which areas will be treated, what preparation is required, the proposed colour-matching process and whether access equipment is included.

It is also sensible to establish what aftercare or maintenance may be required.

Frequently Asked Questions

Why are the bricks on my new build house different colours?

Different coloured bricks on a new build house can result from manufacturing batch variations, different suppliers or inconsistent blending during construction. Natural differences in clay and firing conditions can also affect the final shade. If the variation is particularly noticeable, a professional assessment can help establish whether brick tinting would improve the appearance.

Can different coloured bricks be made to match?

Yes, professional brick tinting can often help bring different coloured bricks closer to a consistent shade. A specialist assesses the existing masonry, selects suitable colours and tests the treatment before applying it. The aim is to reduce obvious differences while retaining the natural appearance of the brickwork.

Is brick tinting better than painting?

Professional brick tinting is generally more suitable for correcting brick colour differences than ordinary painting. Specialist treatments are designed for masonry and aim to retain the natural texture and appearance of the bricks. Ordinary paint can create an artificial surface coating and may affect how moisture moves through certain types of brickwork.

How long does professional brick tinting last?

The lifespan of brick tinting depends on the products used, the condition of the masonry, preparation and environmental exposure. A suitable professional treatment can provide long-lasting colour improvement, although no treatment should be assumed to last indefinitely. Homeowners should ask the contractor about expected durability and any maintenance recommendations.

Can brick tinting be carried out on a brand-new house?

Yes, brick tinting can be suitable for new properties if the brickwork is in an appropriate condition and the cause of the colour variation has been established. The surface may need to be clean and sufficiently dry before treatment. Homeowners should also consider any outstanding developer or warranty issues before commissioning cosmetic work.

Will brick tinting make every brick exactly the same colour?

Not necessarily, and achieving complete uniformity is not always desirable. Natural brickwork usually contains subtle colour differences that contribute to its appearance. Professional tinting aims to reduce significant variations and create a balanced finish rather than making every brick look artificially identical.

Can you tint just a small section of a brick wall?

Yes, localised brick tinting is possible where the colour difference affects a relatively small area. However, the specialist must consider the surrounding bricks, lighting and overall wall appearance to ensure that the treated section blends naturally. Sample testing is particularly useful before completing the work.

Does brick tinting damage the brickwork?

When suitable products are selected and correctly applied, professional brick tinting should not damage sound brickwork. The treatment must be appropriate for the brick type and its condition. Using unsuitable coatings or applying products without proper preparation can create problems, which is why professional assessment is recommended.

How much does it cost to tint bricks in the UK?

Small brick tinting jobs may cost around £250 to £450, while larger colour correction projects can range from £600 to several thousand pounds. The price depends on the affected area, brick condition, access and complexity of the colour matching. A site assessment is the best way to establish an accurate cost.

Should I contact my housebuilder before arranging brick tinting?

Yes, homeowners should consider contacting their housebuilder before commissioning any cosmetic treatment, particularly if the property is newly completed. Significant brick colour differences may need to be investigated as part of the original construction or snagging process. It is sensible to document the issue and establish whether the developer will address it before arranging independent work.

Call Now Button