Skip to main content

Brick Makeover

Can You DIY Brick Tinting? The Complete Guide to the Risks & Results

Get a Quote

Brick tinting can completely change the appearance of tired, mismatched or weathered brickwork, which naturally leads some homeowners to wonder whether it is something they can tackle themselves. At first glance, it may appear straightforward. Choose a colour, apply it to the bricks and allow it to dry.

In practice, achieving a convincing and natural-looking finish can be considerably more complicated.

Brickwork is made up of individual bricks, mortar joints, textures and natural colour variations. Any treatment needs to work with these characteristics rather than simply covering everything in a uniform layer. This is particularly important when the aim is to make one section of brickwork blend with another.

For anyone considering a DIY approach, understanding the potential risks is essential before putting any product onto the wall. Specialist companies such as Brick Makeover work with the existing appearance of brickwork and can use colour-matching techniques to achieve a more controlled result.

What Is Brick Tinting?

Brick tinting is the process of altering the colour or tone of existing brickwork without replacing the bricks.

It can be used to address differences caused by:

  • Weathering
  • Brick replacements
  • Different manufacturing batches
  • Extensions
  • Repairs
  • Construction phases
  • Discontinued brick types
  • General changes in colour over time

The objective is normally to make the brickwork look more consistent rather than completely disguise the fact that it is brick.

This distinction is important when considering DIY work. Painting a brick wall one solid colour is very different from tinting individual bricks to achieve a natural-looking finish.

Why DIY Brick Tinting Looks Easier Than It Is

The biggest attraction of DIY brick tinting is its apparent simplicity.

A homeowner might look at a mismatched brick and think that applying a darker or lighter colour should solve the problem. The difficulty comes from reproducing the subtle variations found throughout natural brickwork.

A wall may contain several shades of red, brown, orange or grey. Individual bricks can also have darker edges, lighter centres, variations in texture and different levels of weathering.

A successful result therefore requires more than simply selecting a colour that looks close.

The colour can look different once applied

A colour that appears suitable on a sample, screen or colour chart may look completely different once it is applied to an existing brick.

Factors such as:

  • Natural daylight
  • Brick texture
  • Existing colour
  • Surface condition
  • Surrounding brickwork
  • Mortar colour
  • Wet or dry appearance

can all affect the finished result.

This is one reason why testing a small area is so important.

Can You Tint Bricks Yourself?

Technically, some homeowners may be able to carry out small-scale brick tinting themselves. The more important question is whether they can achieve the desired result without creating a more noticeable problem.

DIY work becomes particularly risky when the objective is to match existing brickwork rather than simply change its colour.

A small garden wall may provide an opportunity to experiment. A front elevation, extension or large section of a property is a very different proposition.

Once a colour has been applied incorrectly, correcting it can be considerably more difficult than getting the initial treatment right.

The Biggest Risk: Getting the Colour Wrong

Colour matching is arguably the most difficult part of brick tinting.

Imagine that an extension has been built using bricks that are slightly too orange compared with the original house. Choosing a darker red tint might seem logical.

However, applying the same colour uniformly to every brick could make the extension look even more artificial.

The original wall may contain several subtle tones. The new section may need a combination of adjustments to reproduce the same overall appearance.

Brick colour is rarely just one colour

Existing appearancePossible characteristics
Red brickRed, orange, brown and darker tones
Brown brickBrown, red, grey and charcoal tones
Multi-coloured brickSeveral distinct shades
Weathered brickMuted or faded tones
Modern brickStronger and more consistent colour
Handmade-style brickSignificant individual variation

This is why professional colour matching often involves assessing the wall itself rather than relying on a standard paint colour.

The Risk of Creating a Painted Appearance

Another major concern is making the brickwork look painted.

Brick is valued partly because of its texture and natural variation. A flat coating can make the surface appear artificial.

This can happen when too much product is applied or when the same colour is used on every brick without considering the existing variation.

Instead of blending into the property, the treated area can become more noticeable.

A natural finish needs variation

Consider a wall containing 500 bricks.

If every brick receives exactly the same colour, the result may look remarkably uniform.

If the surrounding brickwork naturally contains several shades, this uniformity can draw attention to the treated area rather than disguising it.

A more convincing finish normally works with the variation already present in the masonry.

DIY Brick Tinting Can Highlight Repairs

Brick tinting is sometimes considered after repairs have been carried out.

A damaged brick may have been replaced with a new brick that is slightly different in colour from the surrounding masonry. Tinting can potentially help reduce that difference.

However, treating only the replacement brick requires precision.

If the tint spreads onto neighbouring bricks, or the colour is noticeably different once dry, the repair can become even more visible.

This is particularly problematic on front elevations where the brickwork is clearly visible.

What Happens If the Tint Is Too Dark?

Applying too much colour can create an obvious patch.

Darkening a brick is not necessarily reversible simply by applying a lighter colour afterwards. Further treatments can complicate the appearance and make the original brickwork increasingly difficult to match.

This is why gradual testing is preferable to applying a strong colour across a large area immediately.

A small sample can reveal whether the chosen treatment is moving the brick in the right direction before more work is undertaken.

What Happens If the Tint Is Too Light?

A tint that is too subtle may fail to solve the original problem.

For example, if replacement bricks are significantly lighter than the surrounding weathered bricks, a very mild treatment may leave the contrast almost unchanged.

This can lead to repeated applications.

The more layers or treatments that are introduced, the harder it can become to predict the final appearance.

The objective should therefore be to establish the appropriate colour and application approach before treating a large area.

The Importance of Testing a Sample

Anyone considering DIY brick tinting should never start with the most visible part of the wall.

A discreet test area can provide useful information about how the product behaves on the specific brick.

The sample should be allowed to dry fully and assessed in natural daylight.

It can also be useful to view the area from different distances.

Check the sample for:

  • Colour accuracy
  • Coverage
  • Texture
  • Variation between bricks
  • Relationship with the mortar
  • Appearance in sunlight
  • Appearance in shade
  • Overall consistency

A colour that looks perfect at arm’s length may appear completely different from across the road.

Why Weather Conditions Matter

External brickwork is exposed to changing weather, which can affect application and drying.

Rain, excessive moisture, strong sunlight and temperature changes can all make exterior treatment more difficult to control.

For DIY projects, this can make timing particularly challenging.

A wall that appears suitable for treatment in the morning may become damp later in the day. Conversely, strong direct sunlight can affect how quickly an application dries.

Professionals working on exterior masonry can plan around these conditions and understand how they affect the process.

The Problem With Treating Damp Brickwork

Brick is porous.

Moisture within the masonry can affect how a tint behaves and how evenly the colour develops.

Applying a treatment to damp brickwork can therefore produce inconsistent results.

Some areas may absorb the treatment differently from others, creating variations that were not intended.

This is another reason why simply choosing a dry-looking day does not necessarily guarantee suitable conditions.

The condition and moisture level of the masonry should be considered before treatment.

DIY Brick Tinting and Surface Preparation

Before tinting, the brickwork may need to be assessed and prepared.

Existing dirt, staining, algae, moss or previous coatings can affect the final appearance.

Applying a tint over an inconsistent surface can result in inconsistent colour.

Potential preparation issues

ProblemPotential effect
DirtUneven colour
MossPoor coverage
AlgaeColour variation
Previous coatingDifferent absorption
EfflorescenceVisible deposits
DampnessUneven treatment
Heavy stainingPatchy appearance

Preparation therefore forms an important part of achieving a professional finish.

Mortar Joints Need Consideration Too

Brick tinting is primarily concerned with the brick itself, but the mortar surrounding each brick contributes to the overall appearance of the wall.

If the brick colour changes but the mortar remains exactly as it was, the relationship between the two may alter.

This is particularly important where brickwork has a strong contrast between brick and mortar.

Care is needed to keep the treatment within the intended areas and avoid creating visible marks across the joints.

DIY Can Be Time-Consuming

One of the biggest differences between DIY and professional brick tinting is the amount of time involved.

A homeowner may initially estimate that a wall will take an afternoon.

Once individual bricks, colour variation, preparation and careful application are taken into account, the project can become considerably more involved.

A typical DIY project may involve:

  1. Identifying the colour difference
  2. Selecting a suitable product
  3. Cleaning the brickwork
  4. Waiting for appropriate conditions
  5. Testing a sample
  6. Assessing the sample
  7. Adjusting the colour
  8. Treating individual bricks
  9. Checking the finish
  10. Correcting inconsistencies

For a large elevation, this can become a substantial project.

When DIY Brick Tinting May Be More Reasonable

DIY does not automatically mean a poor result.

There are circumstances where a homeowner may feel comfortable experimenting with a small area.

For example, a concealed section of garden wall is considerably less risky than the front elevation of a house.

The consequences of getting the colour slightly wrong are also much smaller.

Consider DIY only where:

  • The area is relatively small
  • The masonry is in good condition
  • The desired colour change is straightforward
  • You can test the product first
  • The area is not highly visible
  • You are comfortable with detailed work
  • You understand that the result may not be perfect

The larger and more prominent the project becomes, the greater the value of professional colour matching.

When Professional Brick Tinting Makes More Sense

Professional treatment becomes particularly worthwhile when the brickwork is highly visible or the colour match needs to be precise.

This could include:

  • Front elevations
  • Large extensions
  • Whole houses
  • Housing developments
  • Commercial buildings
  • Period properties
  • Prominent boundary walls
  • Multiple properties
  • Areas where repairs are highly visible

The cost of professional work should also be considered against the potential cost of correcting a poor DIY result.

How Professionals Approach Colour Matching

Professional brick tinting is not simply a matter of applying one colour across an entire wall.

The existing masonry is assessed first.

The objective is to understand the colours already present and determine what needs to change.

A sample can then be developed and assessed before the wider treatment takes place.

The process may involve:

StagePurpose
AssessmentUnderstand the existing masonry
Colour analysisIdentify the dominant tones
Sample preparationTest the proposed match
EvaluationAssess the result in natural conditions
AdjustmentRefine the colour where required
ApplicationTreat the agreed areas
InspectionCheck the finished appearance

This approach reduces the risk of committing to a colour before seeing how it behaves on the actual brickwork.

How Long Does Brick Tinting Last?

The longevity of a brick tinting treatment depends on several factors, including the condition of the original brickwork, exposure and the type of treatment used.

External masonry is continually exposed to:

  • Rain
  • Sunlight
  • Frost
  • Wind
  • Pollution
  • Temperature changes

No exterior finish should be considered completely unaffected by the environment.

A properly considered treatment can, however, provide a long-lasting change to the appearance of suitable brickwork.

Does Brick Tinting Damage Bricks?

The condition and suitability of the masonry should be assessed before any treatment is undertaken.

Brickwork is not all the same. Age, porosity, previous treatments, damage and surface condition can all influence how suitable it is for tinting.

A DIY approach carries a risk because the homeowner may not recognise issues that could affect the treatment.

If bricks are damaged, heavily contaminated or already coated, simply applying a tint may not be appropriate.

DIY Brick Tinting Mistakes to Avoid

If you are considering tackling a small project yourself, several mistakes are worth avoiding.

Do not skip the sample

Never assume a colour will look the same on the wall as it does in the container.

Do not treat the entire wall immediately

Test first and allow the sample to dry.

Do not aim for perfect uniformity

Natural brickwork usually contains variation.

Do not ignore preparation

Dirt and surface contamination can affect the finish.

Do not work in unsuitable weather

Moisture and extreme conditions can affect the application.

Do not underestimate the scale

A small sample and an entire elevation are very different projects.

Do not assume one colour will work everywhere

Different sections of the same property can weather differently.

What Does Professional Brick Tinting Cost?

The price of professional brick tinting varies depending on the size and complexity of the project.

A small area requiring detailed colour matching can sometimes require more specialist work than a larger straightforward surface.

Factors can include:

  • Size of the area
  • Number of bricks
  • Colour variation
  • Required colour match
  • Preparation
  • Accessibility
  • Number of elevations
  • Number of properties
  • Sample requirements
  • Level of detail required

A professional service should be viewed as a specialist finish rather than a low-cost painting alternative. Where an accurate match is important, the expertise involved in assessing and treating the masonry is a significant part of the work.

Is Brick Tinting Better Than Replacing the Bricks?

There is no universal answer.

If bricks are structurally damaged, replacement may be necessary.

If they are sound but simply do not match surrounding masonry, tinting may provide a practical alternative.

SituationPotential approach
Cracked brickReplacement may be necessary
Missing brickReplacement required
Sound but mismatched brickTinting may be suitable
New extension looks too brightTinting may help
Different brick batchTinting may reduce variation
Weathered versus new masonryTinting may help blend colours
Widespread structural damageFurther masonry work may be required

The condition of the brickwork should always come before cosmetic considerations.

The Difference Between Changing Colour and Matching Colour

This is perhaps the most important point when deciding whether to attempt DIY brick tinting.

Changing the colour of brickwork can be relatively straightforward.

Matching it is much harder.

If the objective is simply to make a wall darker, there may be several possible approaches.

If the objective is to make a new extension look like the original 30-year-old brickwork beside it, the process becomes much more precise.

The finished result needs to account for the existing colour, texture, weathering and natural variation.

Is DIY Brick Tinting Worth the Risk?

For a small, low-visibility area, DIY brick tinting may be something a confident homeowner chooses to experiment with.

For prominent brickwork, however, the risks increase considerably.

A poorly matched colour can make the original problem more noticeable. An overly uniform finish can make natural brickwork look painted. Uneven application can create patches that are difficult to correct.

Professional brick tinting offers a more controlled route where the appearance of the finished masonry is particularly important.

This is especially relevant for front elevations, extensions, housing developments and properties where a close colour match is required.

Before applying anything to the wall, assess the condition of the brickwork, identify exactly what you are trying to achieve and test the proposed colour on a small area. If the project involves a large or highly visible section of masonry, specialist colour matching can significantly reduce the risk of an expensive cosmetic mistake.

Call Now Button