Skip to main content

Brick Makeover

Can You Change the Colour of New Bricks Without Replacing Them?

Get a Quote

New brickwork should give a property a clean, consistent finish, but the result does not always match what was expected. Perhaps the bricks look too orange, red or yellow, the colour clashes with the existing building, or an extension stands out because its brickwork does not blend with the original property.

Replacing the bricks might seem like the only way to correct the problem, but it is not always necessary. In many cases, the appearance of new brickwork can be changed using specialist brick tinting techniques, allowing the colour to be adjusted while retaining the existing bricks.

For homeowners, developers and builders, understanding how this process works can help avoid unnecessary demolition and the expense of rebuilding. This guide explains how you can change the colour of new bricks, which methods are suitable, what results to expect and how much professional brick colour treatment may cost.

Can You Change the Colour of New Bricks Without Replacing Them?

Yes, you can change the colour of new bricks without replacing them, provided the brickwork is in suitable condition and the correct treatment is selected. Specialist brick tinting can alter the appearance of existing bricks while preserving their original texture and surface characteristics.

This is particularly useful when newly built brickwork does not match the rest of a property. It can also help correct variations caused by different production batches, unexpected colour choices or changes made during a construction project.

What is brick tinting?

Brick tinting is a specialist process that changes the visible colour of brickwork using suitable mineral-based or masonry-compatible colour treatments. Rather than covering the bricks with a conventional opaque coating, a properly selected tint is designed to work with the masonry surface.

The objective is to adjust the colour without making the bricks look like they have been painted. Their natural texture, joints and surface details should remain visible.

A professional assessment is necessary because bricks vary in composition, porosity, texture and finish. A treatment that works well on one type of brick may not produce the same result on another.

Why might new bricks need colour adjustment?

There are several reasons why newly installed bricks may look different from the intended finish.

  • Incorrect colour selection: The chosen brick may appear different once installed across a large wall.
  • Batch variation: Bricks supplied from different production batches may not have identical shades.
  • Extension work: New brickwork may contrast sharply with the original building.
  • Unexpected appearance: The colour may look different in natural daylight compared with samples or showroom lighting.
  • Design changes: A property owner may decide that the finished exterior needs a warmer, cooler or more muted appearance.

The important point is that a colour mismatch does not automatically mean the bricks are unsuitable. If the masonry is structurally sound, changing the appearance may be a more practical option than removing it.

Why New Brickwork Can Look Different from Expected

Brick colour is influenced by more than the basic shade shown on a sample. Manufacturing methods, raw materials, firing conditions, surface texture and the way bricks are laid can all affect the final appearance.

Even when bricks are ordered from the same range, the finished wall may look noticeably different from a small sample.

Manufacturing and batch differences

Clay bricks are made from natural materials, so variations can occur during production. Differences in clay composition, firing temperature and kiln conditions can influence the final colour.

Some manufacturers deliberately produce bricks with natural colour variation to create a traditional appearance. This can be attractive in certain settings, but it may be unwanted when a consistent finish is required.

If a project uses bricks from different batches, the difference may become more obvious once they are laid together. A wall that looked reasonably consistent during construction can reveal contrasting shades when viewed from a distance.

Lighting changes the appearance

The same brickwork can look different throughout the day. Direct sunlight may make warm red and orange tones appear stronger, while shaded elevations can look darker or cooler.

Artificial lighting can also affect how colours are perceived. This is one reason why selecting bricks from a small indoor sample can sometimes lead to disappointment once the full exterior is complete.

Mortar affects the overall finish

Mortar colour has a considerable influence on the appearance of a brick wall. Light mortar can make individual bricks stand out, while darker mortar may create a more uniform or subdued effect.

The joint profile also changes the visual impression. Recessed, flush and weather-struck joints each produce different shadow patterns.

Before deciding that the bricks themselves need treatment, it is worth assessing the mortar and surrounding materials. In some cases, the contrast between the brick and mortar is contributing to the problem.

New and weathered brickwork

Older brickwork often has a softer appearance because of natural weathering, accumulated surface deposits and changes caused by exposure.

New bricks may look brighter, cleaner or more uniform by comparison. Even if the original and replacement bricks are technically similar, the difference in age can make an extension or repaired section stand out.

Brick tinting can help reduce this contrast by adjusting the new masonry towards the appearance of the existing wall.

How Professional Brick Tinting Changes the Colour

Professional brick tinting involves assessing the masonry, selecting an appropriate colour treatment and applying it in a controlled manner. The aim is to achieve a consistent result that looks natural rather than creating an obvious painted finish.

The exact process depends on the brick type, the required colour change and the condition of the wall.

Step 1: Assessing the brickwork

The first stage is to inspect the bricks and identify their existing colour, texture and surface condition. The specialist should consider whether the wall is new, previously treated, contaminated or affected by moisture.

This assessment helps determine whether tinting is appropriate. Loose material, construction residue, efflorescence or other surface problems may need attention before any colour treatment is considered.

The surrounding brickwork should also be examined. If the aim is to make an extension match an older building, the existing wall provides the reference for selecting the target shade.

Step 2: Selecting the target colour

Choosing the correct colour is one of the most important parts of the process. A specialist needs to consider the overall appearance of the wall rather than simply matching one individual brick.

Brickwork naturally contains variation, so a convincing result may require more than one shade. The objective is usually to create a balanced appearance that works with the existing masonry.

A suitable colour should also be assessed under the lighting conditions in which the wall will normally be seen.

Step 3: Preparing the surface

Preparation helps the treatment adhere and produce a more predictable finish. Depending on the condition of the brickwork, this may involve removing loose dirt, dust, mortar residue or other surface contamination.

The wall must be suitable for treatment, including having an appropriate moisture condition. Applying a product to a dirty or unsuitable surface can affect the result.

Step 4: Applying the tint

The selected treatment is applied using a method appropriate to the brickwork and product specification. Care is needed around mortar joints, adjoining materials, windows, doors and other features.

A professional application should take account of natural colour variation rather than simply applying the same heavy coating to every brick.

Step 5: Checking the finished appearance

Once the treatment has been applied and allowed to develop or dry as required, the finish should be inspected. This helps identify any areas that may need further attention.

The result should be judged across the full elevation, not just at close range. A successful colour adjustment should look appropriate from different viewing distances and in different lighting conditions.

Which Brick Colours Can Be Changed?

Brick tinting can be used to adjust a range of existing brick colours, although the achievable result depends on the starting shade, the brick surface and the treatment selected.

A modest change is generally more straightforward than a dramatic transformation. Moving from a bright red towards a deeper red-brown, for example, may be more practical than attempting to turn very dark bricks into a pale cream colour.

Common colour adjustments

Existing brick colourPossible colour adjustmentMain consideration
Bright redDeeper red or brown-redAvoid making the finish look too dark
OrangeMuted red, brown or warmer earth tonesThe original orange undertone may remain influential
YellowWarmer buff or muted brown tonesLight colours can be difficult to alter significantly
Pale redRicher red or softer brownMaintaining natural variation is important
Dark brownAdjusted brown or deeper earth tonesLightening may be more challenging
Mixed red and brownMore balanced blended appearanceSeveral tones may be needed for a natural result

These are general examples rather than guaranteed outcomes. The actual result should be established through an assessment and, where appropriate, a sample treatment.

Can you make red bricks look brown?

In many cases, red brickwork can be adjusted towards a brown or red-brown appearance. The final shade depends on the intensity of the original red and the characteristics of the treatment.

A specialist should assess whether the desired brown is realistic without creating an overly uniform or artificial finish.

Can yellow bricks be made darker?

Yellow bricks may be suitable for darker colour adjustments, such as warmer buff, brown or other earth-toned finishes. However, the starting colour can influence the final result.

If the requested change is substantial, testing is particularly important. A colour treatment should not be assumed to produce the exact shade shown on a colour chart.

Can you lighten dark bricks?

Lightening dark bricks can be more difficult than making lighter bricks darker. The original colour may continue to influence the final appearance, and a treatment designed to lighten masonry may have limitations.

A professional assessment can establish whether the desired finish is achievable or whether another approach would be more appropriate.

Brick Tinting vs Painting: Which Is Better?

Brick tinting and conventional masonry painting are not the same process. Both can change the appearance of a wall, but they generally produce different finishes and behave differently on the surface.

The right choice depends on the desired appearance, the condition of the masonry and whether retaining the natural character of the bricks is a priority.

Understanding the difference

Conventional masonry paint is designed to form a visible coating over the surface. It can provide a uniform colour, but it may reduce the natural variation and texture that make brickwork distinctive.

Brick tinting is intended to adjust the appearance while retaining more of the brick’s original character. A suitable treatment is selected for the masonry rather than simply covering it with an opaque layer.

FeatureProfessional brick tintingConventional masonry paint
Main purposeAdjust existing brick colourCover the surface with a new colour
Natural textureDesigned to retain visible brick characterCan reduce the appearance of natural texture
Colour variationCan be adjusted to preserve variationOften creates a more uniform finish
AppearanceAims for a natural masonry finishUsually looks more like a painted surface
SuitabilityDepends on brick type and treatment compatibilityDepends on surface condition and paint specification
MaintenanceDepends on product, exposure and preparationMay require maintenance or repainting over time

Why the finish matters

Brickwork is often chosen for its natural appearance and durability. A treatment that makes it look like a painted wall may not be suitable for a property where the original masonry character is important.

For example, a period property with traditional brickwork may benefit from a subtle colour adjustment rather than a completely uniform painted finish.

On a modern building, the owner may have different design priorities. The important thing is to understand what each method will look like and how it will perform before making a decision.

Consider moisture and breathability

Brick and mortar can absorb and release moisture. Any treatment applied to the surface should be suitable for the type of masonry and the building’s construction.

A product that is inappropriate for the substrate could affect moisture movement or contribute to future problems. This is particularly relevant for older buildings and walls exposed to driving rain.

A professional should consider the condition and characteristics of the brickwork before recommending a treatment. The fact that a product is described as suitable for masonry does not automatically mean it is appropriate for every brick wall.

How Much Does Professional Brick Tinting Cost in the UK?

The cost of changing brick colour depends on the size of the area, the existing brick condition, the degree of colour adjustment and the preparation required.

A small area around a repaired section may be relatively straightforward, while a complete elevation with several brick shades can require more detailed colour matching and application.

The following figures are typical planning guides rather than fixed prices or quotations.

Type of workIndicative UK price guide
Small brick colour correction£300–£600
Localised tinting to an extension or repair£500–£1,000
Medium-sized wall or elevation£900–£1,800
Larger property elevation£1,500–£3,000+
Extensive colour matching across several elevations£2,500–£5,000+

Actual costs can vary considerably. Access equipment, the number of colours involved, surface preparation and the complexity of the building may all affect the final quotation.

What influences the price?

Size of the area: Larger walls require more materials and application time. However, small projects can still involve significant preparation and specialist work.

Colour complexity: Matching a single, consistent brick shade may be simpler than reproducing a wall containing several natural tones.

Condition of the bricks: New brickwork may need less preparation than older masonry affected by staining, dirt or previous treatments. Any surface problems must be assessed before tinting begins.

Access requirements: High elevations, restricted spaces and difficult site access can increase labour and equipment costs.

Testing and colour matching: Achieving a natural appearance may require sample work and careful adjustment. This is particularly important when new bricks need to blend with older masonry.

Why a professional service may cost more

Brick tinting is not simply a matter of applying colour to a wall. The specialist needs to understand masonry surfaces, select suitable products, assess the existing shades and apply the treatment consistently.

A more thorough service may cost more because it includes proper preparation, suitable equipment, careful colour selection and attention to the finished appearance. Insurance, workmanship standards and the ability to deal with complex brickwork are also relevant considerations.

The cheapest quotation is not necessarily the best value. If the colour is poorly matched or the treatment is unsuitable, correcting the result can create additional expense.

When Is Brick Colour Matching Better Than Replacing the Bricks?

Replacing bricks can be necessary if they are damaged, unstable or unsuitable for the building. However, if the only problem is their appearance, colour treatment may provide a less disruptive alternative.

The decision should be based on the condition of the masonry as well as the desired finish.

The advantages of keeping the existing bricks

Avoiding replacement can reduce the amount of demolition, waste and rebuilding involved. It may also preserve the existing wall structure and limit disruption around windows, doors, landscaping and adjoining materials.

This can be particularly useful for recently completed extensions where the brickwork is structurally sound but visually inconsistent with the original property.

Brick tinting may also help when an exact replacement brick is difficult to source. Older brick ranges can be discontinued, and reclaimed alternatives may not match perfectly.

When replacement may be necessary

Colour treatment is not a repair method for defective masonry. If bricks are cracked, badly spalled, loose or affected by serious deterioration, the underlying problem needs to be addressed.

Replacement may also be more suitable if the existing bricks have an unsuitable surface treatment or if the required colour change cannot realistically be achieved through tinting.

A specialist should distinguish between a cosmetic issue and a physical defect. Treating damaged brickwork without addressing the cause could leave the property with ongoing problems.

Comparing the two approaches

ConsiderationBrick tintingBrick replacement
Main purposeChange the appearance of existing bricksRemove and install different bricks
Structural workUsually limited if masonry is soundInvolves removing and rebuilding affected areas
DisruptionOften less disruptiveCan involve noise, dust and access restrictions
WasteRetains existing bricksCreates waste from removed masonry
Colour resultDepends on the original brick and treatmentDepends on availability and matching of replacement bricks
Best suited toSound brickwork with an unwanted colourDamaged or unsuitable bricks, or changes requiring rebuilding

What if only part of the wall is different?

A common problem occurs when an extension or repair uses bricks that do not match the original building. Tinting may help blend the newer section with the surrounding masonry.

The work needs to be planned carefully because the target colour is not necessarily the same as every brick in the original wall. A natural-looking match may require a range of tones rather than one uniform shade.

The surrounding mortar, brick texture and overall appearance should all be considered before the treatment is selected.

Choosing a Professional Brick Tinting Specialist

Changing the colour of brickwork is a specialist task. The quality of the result depends on understanding the material, selecting suitable treatments and applying them with care.

A poor colour match can make a wall look patchy or artificial, while an unsuitable product may affect the surface or create maintenance problems.

Look for experience with different brick types

A competent specialist should understand that engineering bricks, clay bricks, handmade bricks and other masonry products can respond differently to colour treatments.

Ask how the proposed treatment will work with your particular brick type. A reliable assessment should consider porosity, texture, existing coatings and the condition of the mortar joints.

Ask about sample testing

Colour selection should not rely entirely on photographs or small printed samples. The appearance of a treatment can vary depending on the original brick and lighting conditions.

A sample area can help establish whether the proposed shade is suitable before work proceeds across a larger elevation.

It is also useful to inspect the sample after it has dried or developed fully, rather than judging it immediately after application.

Check the preparation and application process

Ask what preparation is included and how surrounding surfaces will be protected. A professional should explain how dirt, mortar residue and other contamination will be dealt with before tinting begins.

The quotation should also identify the proposed work area, the treatment approach and any limitations relating to the expected colour change.

Understand maintenance and guarantees

Ask how the treated brickwork should be maintained and what factors may affect its appearance over time. Exposure to sunlight, rain, pollution and general weathering can influence exterior surfaces.

If a guarantee is offered, check exactly what it covers, how long it lasts and whether any maintenance conditions apply. Do not assume that every tinting treatment has the same lifespan or guarantee terms.

Make sure the quotation is clear

A detailed quotation should explain:

  • Which walls or sections will be treated.
  • The intended colour and matching approach.
  • What preparation is included.
  • Whether sample testing is required.
  • How windows, doors and surrounding materials will be protected.
  • Any access equipment or additional work required.
  • The expected completion timescale.
  • Any relevant maintenance guidance or guarantee conditions.

Clear information makes it easier to compare quotations on quality and scope rather than simply choosing the lowest figure.

Frequently Asked Questions

Can newly built red bricks be changed to a different colour?

Yes, newly built red bricks can often be tinted to adjust their appearance, depending on their surface and the colour required. A specialist can assess whether a deeper red, brown-red or another suitable shade is achievable. Testing is advisable before treating the entire wall.

Will brick tinting make my bricks look painted?

Professional brick tinting is intended to change the visible colour while retaining the natural character of the masonry. Unlike an opaque paint coating, a suitable tinting treatment aims to preserve visible brick texture and variation. The finished appearance depends on the product, application and original brick surface.

Can brick tinting match an extension to an older house?

Yes, brick tinting can help reduce the colour difference between a new extension and an older property. The specialist will need to assess the original brickwork and select a suitable combination of shades. Matching the overall wall appearance is usually more effective than trying to reproduce one individual brick exactly.

How long does professional brick tinting take?

The time required depends on the size of the wall, access arrangements, preparation and the complexity of the colour match. A small area may be completed relatively quickly, while larger elevations or projects involving several shades will take longer. Weather and product-specific drying requirements can also affect the schedule.

Does brick tinting damage the original bricks?

A suitable brick tinting treatment should not damage sound masonry when the correct products and preparation methods are used. However, not every treatment is suitable for every type of brick. The surface should be assessed before work begins, particularly if the wall has existing coatings, moisture problems or signs of deterioration.

Can I tint bricks myself?

DIY brick colouring products are available, but achieving a natural and consistent finish can be difficult without experience. Colour matching, surface preparation and application technique all affect the result. For prominent exterior walls or large areas, professional treatment can reduce the risk of uneven colouring and costly corrections.

Is brick tinting cheaper than replacing bricks?

Brick tinting is often less disruptive than removing and replacing sound brickwork, and it may be more economical when the issue is purely cosmetic. However, the actual cost depends on the area, access and colour requirements. Replacement remains necessary if the bricks are damaged or structurally unsuitable.

Will the colour fade over time?

The long-term appearance depends on the treatment used, the original masonry and the amount of exposure to sunlight and weather. Exterior brickwork experiences natural environmental changes, so no treatment should be assumed to remain identical indefinitely. Ask the specialist about expected performance and maintenance requirements.

Can different shades be used on the same wall?

Yes, different shades may be needed to create a natural result, particularly when matching traditional brickwork with several colours. Applying one uniform shade across every brick can make the wall look artificial. A considered approach uses the existing variation as a guide when selecting the treatment.

Can brick tinting be carried out in winter?

It may be possible during suitable winter conditions, but temperature, rain, frost and surface moisture can affect application and drying. Product specifications must be followed, and the brickwork needs to be in an appropriate condition. A specialist should assess the forecast and site conditions before scheduling exterior work.

Call Now Button